{"product_id":"simpson-strong-tie-2-in-x-8-in-10-in-and-12-in-joist-hanger-joist28","title":"Simpson Strong-Tie 2 in. x 8 in., 10 in. and 12 in. Joist Hanger","description":"\u003cp\u003eA joist hanger is a formed sheet-steel connector that carries the end of a joist where it meets a header, rim board, beam or ledger. The back flange nails to the face of the supporting member and the U-shaped seat cradles the joist end, so the two members finish flush at the top rather than relying on toe-nailing or a ledger strip.\u003c\/p\u003e\n\u003cp\u003eThis is a Simpson Strong-Tie hanger offered in the common nominal joist depths carried for 2x framing. Hangers are sized to the member they hold, so the seat width matches nominal 2x stock and the height suits the joist depth; the correct size is chosen from the lumber being hung, not from the opening.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward: hold the hanger tight to the underside of the joist, square to the header, and drive connector nails through every filled hole in the flanges and side tabs. Hangers are specified and fastened per the connector manufacturer's published tables and the project drawings, and the fastener type called out there should be used rather than common framing nails.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFormed sheet-steel connector with a U-shaped seat and a face flange that nails to the supporting header, beam or ledger\u003c\/li\u003e\n\u003cli\u003ePre-punched nail holes in the flanges and side tabs locate fasteners in the pattern the connector is designed around\u003c\/li\u003e\n\u003cli\u003eHolds the joist end flush with the top of the carrying member, keeping subfloor and decking planes level\u003c\/li\u003e\n\u003cli\u003eOffered in matching sizes for the common nominal 2x joist depths, so one hanger family covers most floor and deck framing\u003c\/li\u003e\n\u003cli\u003eInstalls from the face of the framing with a hammer or positive-placement nailer; no notching, ripping or ledger strip required\u003c\/li\u003e\n\u003cli\u003eSimpson Strong-Tie wood connectors are stamped with the model designation, which lets an inspector verify the part after framing\u003c\/li\u003e\n\u003cli\u003eSold individually, so quantities can be matched to the joist count on a given job\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHanging floor joists off rim boards, headers and built-up beams\u003c\/li\u003e\n\u003cli\u003eDeck framing where joists meet a ledger or beam face\u003c\/li\u003e\n\u003cli\u003eFraming openings for stairwells, chimneys and skylights, where trimmers and headers meet\u003c\/li\u003e\n\u003cli\u003eCeiling joists and rafters landing on a flush header or ridge\u003c\/li\u003e\n\u003cli\u003eRemodel and repair work where a joist end must be picked up on an existing member\u003c\/li\u003e\n\u003cli\u003eGarage, shed and accessory-structure framing using nominal 2x joists\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Simpson Strong-Tie\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Joist hanger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood-to-wood framing connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Formed sheet steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Face-nailed to the supporting member with connector nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Nominal 2x joists in the depths listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Sale:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"product-specs\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e2\" x 8\" x 10\" x 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSimpson Strong-Tie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":55112700559699,"sku":"JOIST28","price":1.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/7743\/4195\/files\/simpson-strong-tie-2-in-x-8-in-10-in-and-12-in-joist-hanger-joist28.webp?v=1790734564","url":"https:\/\/arch-9365.myshopify.com\/es\/products\/simpson-strong-tie-2-in-x-8-in-10-in-and-12-in-joist-hanger-joist28","provider":"ARCH","version":"1.0","type":"link"}