Starter strip shingles are the first course laid at the eave and up the rake before any field shingles go down. GAF supplies them as pre-cut asphalt strips in a bundle, so the crew does not have to field-cut three-tab shingles, reverse them and hope the adhesive lands where it belongs.

Each strip is a fiberglass-reinforced asphalt shingle with a factory-applied adhesive bead positioned near the lower edge. Once the first course of field shingles is nailed over it, that adhesive bonds the shingle tabs down at the perimeter, which is where wind uplift begins on a steep-slope roof. The strips also cover the joints between the first course of shingles so water shedding off the roof cannot find a path to the deck.

Installation follows the usual sequence: underlayment and eave protection first, starter strip set flush to or slightly overhanging the drip edge, then the field shingles starting at the eave. The same strip is run up the rakes on jobs where rake protection is specified.

Key Features

• Pre-cut starter course eliminates cutting and reversing field shingles at the eaves and rakes
• Factory-applied adhesive positioned along the lower edge to bond the first course of shingles
• Seals the perimeter of the roof, where wind uplift and shingle blow-off typically start
• Covers the cutouts and joints in the first course so run-off cannot reach the deck
• Fiberglass-reinforced asphalt construction, the same material class as the field shingles it sits under
• Straight factory edge produces a consistent, even line along the eave and rake
• Works under standard three-tab and laminated architectural asphalt shingles
• Packaged by the bundle for straightforward take-off by linear foot of eave and rake

Applications

• Starter course at the eaves of asphalt shingle roofs
• Rake edges where perimeter sealing is specified
• New residential steep-slope roofing over underlayment and drip edge
• Tear-off and re-roof work on houses, garages and dormers
• Low-slope-to-steep transitions and small outbuilding roofs finished with asphalt shingles

Product Details

• Brand: GAF
• Product Type: Starter strip shingles
• Material: Fiberglass-reinforced asphalt shingle
• Adhesive: Factory-applied sealant strip
• Roof Type: Steep-slope asphalt shingle roofing
• Location On Roof: Eaves and rakes
• Unit Of Sale: Bundle
• Product Line: GAF Pro-Start (GAF's starter strip line supplied at this bundle coverage)

Specifications

使用此文本分享有关您产品的信息。

使用此文本分享有关您产品的信息。