紧固件

A galvanized steel joist hanger sized to receive a built-up carrier of two nominal 2 in. x 10 in. members. The hanger wraps the end of the joist an...

A galvanized steel joist hanger sized for nominal 2 in. by 12 in. framing lumber. The hanger wraps the end of the joist and transfers its load into...

Aluminum angle in an 8 ft. length with a 1-1/2 in. leg, pre-punched with a row of holes along its length. The holes let the piece be fastened with ...

An offset angle bracket is a formed metal framing connector with two flanges joined at an angle and a step, or offset, between them. The offset let...

The Simpson Strong-Tie A21Z is a formed steel framing angle from the company's A-series of general-purpose connectors. It is a single piece of shee...

Hurricane ties are the small formed-steel connectors that tie the roof framing down to the wall below, so that uplift from wind does not simply lif...

The H2.5A is a single-sided sheet-metal hurricane tie from Simpson Strong-Tie, used to tie a rafter or truss down to the wall top plate so roof fra...

The Simpson Strong-Tie LS70 is a skewable reinforcing angle from the LS series, a light connector used where two wood framing members meet at somet...

The A23 is one of Simpson Strong-Tie's A-Series framing angles \u2014 a short, formed steel angle bent to 90 degrees and punched with fastener hole...

Attach a 4x4 wood post to existing concrete with the Simpson Strong-Tie ABA44Z adjustable post base. Its built-in 1-inch standoff helps prevent rot...

Wafer-head self-drilling screws with a wide pan washer head, a drill point and zinc plating, for fastening into metal. This listing is the #8 x 3/4...

Wafer-head self-drilling screws with a wide pan washer head, a drill point and zinc plating, for fastening into metal. This listing is the #8 x 1 i...

Wafer-head self-drilling screws with a wide pan washer head, a drill point and zinc plating, for fastening into metal. This listing is the #8 x 1-1...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #14 x 2 in. size in a 5 lb....

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #14 x 1-1/4 in. size in a 5...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #14 x 1-1/2 in. size in a 5...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #12 x 1 in. size in a 5 lb....

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #12 x 1-1/4 in. size in a 5...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #12 x 1-1/2 in. size in a 5...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #12 x 2 in. size in a 5 lb....

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #10 x 3/4 in. size in a 1 l...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #10 x 1-1/4 in. size in a 1...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #10 x 1-1/2 in. size in a 1...

Hex-washer-head self-drilling screws with a drill point and zinc plating, for fastening into metal. This listing is the #10 x 1 in. size in a 1 lb....