Primed casing is finish trim used to case out door and window openings, covering the gap between the jamb and the surrounding wall finish. The factory primer seals the face and edges so the piece is ready for filling, sanding and a finish coat once it is installed.

Casing stock is milled with a profiled face and a relieved or hollow back that lets it sit flat against slightly irregular framing and drywall. It is fastened through the jamb edge and into the trimmer studs, then mitered or coped at the head corners.

Long lengths allow full-height door legs and head casings to be cut from a single piece, keeping joints out of the run.

Key Features

• Factory-primed surface ready for finish paint after filling and sanding
• Milled casing profile for door and window jamb trim
• Relieved back allows the trim to lie flat over uneven wall surfaces
• Takes nails and finish fasteners without pre-drilling in most cases
• Miters and copes cleanly at head and corner joints
• Primer coat reduces the number of finish coats needed on site

Applications

• Casing interior door openings
• Trimming window jambs and stools
• Cased openings and pass-throughs
• Residential and light commercial finish carpentry
• Trim replacement in renovation work

Product Details

• Type: Casing
• Finish: Primed
• Category: Moulding and trim
• Sold By: Piece

Specifications

使用此文本分享有关您产品的信息。

使用此文本分享有关您产品的信息。