Hardware & Systems

A hollow metal head section for a knock-down steel door frame. The head is the horizontal member that spans between the two jambs at the top of the...

The head is the horizontal member that spans the top of a hollow metal door frame, tying the two jambs together and carrying the stop that the door...

A metal access door provides a concealed, reopenable opening in a finished wall or ceiling so plumbing valves, cleanouts, shutoffs, wiring junction...

A metal access door provides a finished, removable opening in a wall or ceiling so plumbing valves, cleanouts, shutoffs, electrical junctions, duct...

An access door is a hinged metal panel set in a mounting frame that creates a permanent, serviceable opening in a finished wall or ceiling. It give...

A metal access panel used to create a serviceable opening in drywall, plaster or masonry walls and ceilings. The frame is set into the rough openin...

A metal access panel used to create a serviceable opening in drywall, plaster, masonry or ceiling assemblies. The frame is set into the rough openi...

A metal access door provides a finished, closable opening into a wall or ceiling cavity so plumbing valves, cleanouts, shutoffs, damper motors, wir...

An access door is a framed metal panel set into a wall or ceiling to create a serviceable opening into a concealed space. Once installed, it lets a...

A face mount joist hanger is a formed metal connector used to carry the end of a joist off a header, beam or ledger. The stirrup cradles the bottom...

A joist hanger is a formed steel connector that carries the end of a joist, header or beam off the face of a supporting member. The U-shaped seat c...

A joist hanger is a formed sheet-steel connector that carries the end of a joist where it meets a header, rim board, beam or ledger. The back flang...

A joist hanger is a formed sheet-metal connector that supports the end of a joist where it meets a header, beam or ledger. The U-shaped seat carrie...

A galvanized steel joist hanger sized for a doubled 2 in. x 8 in. carrier member, used to hang joists, headers and trimmers from a beam, ledger or ...

A joist hanger is a formed metal bracket that carries the end of a joist where it meets a header, beam or ledger, transferring the load through the...

A galvanized steel joist hanger sized to receive a built-up carrier of two nominal 2 in. x 10 in. members. The hanger wraps the end of the joist an...

An access panel is the serviceable opening you leave behind after the drywall goes up: a framed plastic door set into a wall or ceiling so valves, ...

GE Silicone 1 Window & Door is a 100% silicone sealant formulated for sealing the perimeter joints where window and door assemblies meet the su...

Flashing cement is a heavy-bodied asphalt mastic used to seal and bond roof flashings, laps and repairs. It trowels on thick, clings to vertical an...

A hydraulic door closer mounts to the door and frame and controls the door through its swing, bringing it back to the latch under its own power rat...

A door sweep is a surface-mounted weatherseal that closes the gap between the bottom of a door and the threshold or sill. It consists of an aluminu...

A surface-mounted door sweep consisting of an extruded aluminum retainer with a flexible seal blade along its lower edge. The retainer screws to th...

A galvanized steel joist hanger sized for nominal 2 in. by 12 in. framing lumber. The hanger wraps the end of the joist and transfers its load into...

Aluminum angle in an 8 ft. length with a 1-1/2 in. leg, pre-punched with a row of holes along its length. The holes let the piece be fastened with ...